Here's information on how to lower pH in a pool:
Lowering your pool's pH is crucial for swimmer comfort and equipment longevity. High pH (above 7.8) can cause scaling, cloudy water, and reduced chlorine effectiveness. Here's how to do it:
Test Your Water: Always start by testing your pool water's pH and alkalinity. Use a reliable test kit (liquid or strips) and follow the instructions carefully. Understanding your starting point is essential.
Use a pH Reducer: The most common chemical used to lower pH is Sodium Bisulfate (also known as dry acid) or Muriatic Acid (hydrochloric acid).
Calculate Dosage: Carefully calculate the amount of pH reducer needed based on your pool's volume and the current pH level. Refer to the product label for dosage instructions. Using too much can cause the pH to drop too low, requiring further adjustments.
Application:
Circulation: Run the pool pump for several hours (at least 2-4 hours, or as directed on the product) to circulate the chemical throughout the pool.
Re-Test: After circulation, re-test the pH. If it's still too high, repeat the process with a smaller dose. Aim for a pH between 7.2 and 7.8, with the ideal range being 7.4 to 7.6.
Adjust Alkalinity if Necessary: Lowering pH can also affect Total Alkalinity. Ideally, your alkalinity should be between 80-120 ppm. If it is not in this range, adjust it after you adjust the pH.
Important Considerations:
Ne Demek sitesindeki bilgiler kullanıcılar vasıtasıyla veya otomatik oluşturulmuştur. Buradaki bilgilerin doğru olduğu garanti edilmez. Düzeltilmesi gereken bilgi olduğunu düşünüyorsanız bizimle iletişime geçiniz. Her türlü görüş, destek ve önerileriniz için iletisim@nedemek.page